Standards - Jøtul F 600 Instrucciones Para Instalación

USA/cAnAdA
Installation and Operating Instructions for the USA
Installation et fonctionnement pour Canada
Safety notice: If this solid fuel room heater is not properly installed, a house fire may result.
For your safety, follow the installation directions. Contact local building or fire officials
about restrictions and installation inspection requirements in your area. Kindly save these
instructions for future reference.
Avis de sécurité: Une installation non appropriée de ce poêle de chauffage risque de
provoquer un incendie. Assurez votre sécurité en respectant les directives d'installation
suivantes. Consultez les autorités locales du bâtiment ou de la prévention des incendies au
sujet des restrictions et exigences relatives aux inspections d'installations dans votre région.
Tested and listed by ITS, Intertek Testing Services, Middleton, Wisconsin.
Tested to U.S. Standards: ANSI/UL 1482 & 737, Canadian Standards: CAN/ULC-S627-M93

Standards:

The Jøtul F 600 woodstove has been tested and listed to;
U.S. Standards: ANSI/UL 737 and ANSI/UL 1482.
Canadian Standards: CAN/ULC-S627-M93
Tests performed by:
ITS Intertek Testing Services, Middleton, WI
Manufactured by:
Jøtul AS, P.O. Box 1411, N-1602 Fredrikstad, Norway
Distributed by:
Jøtul North America, 55 Hutcherson Drive, Gorham, Maine
04038, USA
This heater meets the U.S. Environment Protection Agency's
Emissions limits for wood heaters manufactured and sold
after July 1, 1990.
Under specific test conditions, this heater has shown heat
output at rates ranging from 13,500 to 45,900 BTU's per
hour.
The Jøtul F 600 woodstove is only listed to burn wood. Do
not burn any other fuels.
Jøtul North America Inc.
55 Hutcherson Drive
Gorham, Maine 04038
USA
Jøtul pursues a policy of continual product development. Products as supplied may therefore differ in specification, colour, or type of
accessories, from those illustrated or otherwise described in publications and brochures.
2
When installing, operating and maintaining your Jøtul F
600 woodstove, follow the guidelines presented in these
instructions, and make them available to anyone using or
servicing the stove.
A number of areas require a building permit to install a
solid fuel burning appliance.
In the U.S., the National Fire Protection Association's Code,
NFPA 211, Standards for Chimneys, Fireplaces, Vents and
Solid Fuel Burning Appliances, or similar regulations, may
apply to the installation of a solid fuel burning appliance
in your area.
In Canada, the guideline is established by the CSA Standard,
CAN/CSA-B365-M93, Installation Code for Solid-Fuel-
Burning Appliances and Equipment.
Always consult your local building inspector or authority
having jurisdiction to determine what regulations apply
in your area.