En-Us English - flir E Serie Manual Del Usuario

1 EN-US English

1.1 Quick Start Guide
1.1.1 Procedure
Follow this procedure:
1. Put a battery into the battery compartment.
2. Charge the battery for 4 hours before starting the camera for the first time, or
until the green battery condition LED glows continuously.
3. Insert a memory card into the card slot.
4. Push to turn on the camera.
5. Aim the camera toward the object of interest.
6. Adjust the focus by rotating the focus ring.
Note
It is very important to adjust the focus correctly. Incorrect focus adjust-
ment affects how the image modes Thermal MSX, Thermal, and Picture-
in-picture work. It also affects the temperature measurement.
7. Push the Save button (the trigger) to save an image.
8. Go to http://support.flir.com/tools
9. Install FLIR Tools on your computer.
10. Start FLIR Tools.
11. Connect the camera to the computer using the USB cable.
12. Import the images into FLIR Tools and create a PDF report.
#T559839; r. AB/18167/18167; mul
and download FLIR Tools.
1