Setting Up And Connecting - König Electronic HAV-MCS30 Manual De Uso

Remote Control
30. ◙ Button
31. iPod® Button
32.  STOP/PS+ Button
33. PLAY MODE/ST/MO Button
34. SLEEP/12/24HR Button
35. /TUNING- and /TUNING + Buttons
36. ID3 Button
37. TIMER Button
38. PROG/CLK ADJ Button
39. OPEN/CLOSE Button
40. MODE/REMAIN Button
41. FOLDER+ Button
42. Infrared Transmitter
43. AUX Button
44. MUTE Button
45. TUNER/BAND Button
46. CD/SD/USB Button
47.  / PS- Button
48. VOL +/- Button
49. The numerical button 0 - 9 can also be used for the following purpose:
- "2" button with  roll up, "8" button with  roll down
- "4" button with Ω Repeat, "5" button with ENTER, "6" button with MENU
50. EQ Button
51. FOLDER - Button

SETTING UP AND CONNECTING

Replacing battery for the Remote Control
The remote control battery is already installed at the factory.
If the remote control stops operating, replace the battery
with a new one.
1. Squeeze the notched tab A while pulling the battery door
latch B out to take the battery holder out.
2. Insert a "CR2025" 3V lithium battery. Make sure the
polarity (the + and – side of the battery) is correct.
3. Replace the battery holder back in the remote control.
3