König Electronic HAV-MCS30 Manual De Uso página 5

Ocultar thumbs Ver también para HAV-MCS30:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
CLOCK AND TIMER
When used for the fi rst time, or if the main plug has been disconnected
for some time, the display will fl ash „AM 12:00"
1. In standby mode, press the PROG/CLK ADJ button (6/38), the hour
digits will fl ash in the display.
2. Press SLEEP/12/24HR (34) button to change between 12hour or
24hour time format.
3. Press //TUNING  or //TUNING  (20, 35) button
repeatedly to set the correct hour.
4. Press the PROG / CLK ADJ (6, 38) button again, then press
//TUNING  or //TUNING  (20, 35) button repeatedly
to set the correct minute.
5. Press PROG / CLK ADJ (6, 38) button again to complete setting the current time.
TIMER ON and OFF setting (Automatically turn on and off the unit)
1. In standby mode, press the MODE/REMAIN (40) button. "TMR-ON"
indicates and "O" fl ashes in the display. Press the PROG / CLK ADJ
(6, 38) button and the hour digit will fl ash.
2. Press the / /TUNING  or / /TUNING  (20, 35)
buttons repeatedly to set the desired hour.
For example " 2:00" .
3. Press the PROG / CLK ADJ (6, 38) button and the minute digit will
fl ash.
4. Press the / /TUNING  or / /TUNING  (20, 35)
buttons repeatedly set to the desired minute.
For example "2.08"
5. Press the PROG / CLK ADJ (6, 38) button again to confi rm the
setting.
6. Press the MODE/REMAIN (40) button again. TMR-OFF shows in the
display. Press the PROG / CLK ADJ (6, 38) button and the hour digit
will fl ash.
7. Press the / /TUNING  or / /TUNING  (20, 35)
buttons repeatedly to set the desired hour.
For example " 4:00".
8. Press the PROG / CLK ADJ (6, 38) button again and the minutes
digit will fl ash.
9. Press the / /TUNING  or / /TUNING  (20, 35)
buttons repeatedly to set the desired minute. For example "4.08" .
10. Press the PROG / CLK ADJ (6, 38) button again to confi rm the
setting.
11. Press the MODE/REMAIN (40) button to return to the current time.
12. Press the TIMER (37) button until "0" indicates in the display. The unit
will automatically turn on and off at the set time.
13. To turn of the timer function press the TIMER (37) button. The "0" will disappear from the
display and the timer function is turned off.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido