Peg-Perego John Deere CONSTRUCTION Trailer Empleo Y Manutencion página 5

ENGLISH
Thank you for choosing a PEG PEREGO ®
product. For over 60 years PEG PEREGO
have been with you as you take your
children out - in carriages just after they
are born, then in strollers, and later on in
pedal and battery-powered toys
Discover our complete range of products,
news and other information about the
Peg Perego world on our web site.
www.pegperego.com
Peg Perego S.p.A is a company whose quality
management system is certified by TÜV Italia Srl,
in compliance with the ISO 9001 standard.
This certification is a guarantee for customers and
consumers of the transparency and trustworthiness
of the company's procedures and working methods.
IMPORTANT INFORMATION
Read this instruction manual carefully to learn how
to use the vehicle and teach your child to drive it
properly and safely while enjoying it at the same
time. Keep the manual safe for future reference.
If you transfer this product to another user, make
sure to include this instructions booklet.
• Ages 2+
• maximum transportable weight 10 kg
Peg Perego reserve the right to make changes to the
models and information in the present publication at
any time, for technical or company reasons.
DECLARATION OF CONFORMITY
PRODUCT NAME
Deere CONSTRUCTION TRAILER
PRODUCT IDENTIFICATION CODE
IGTR0948
REFERENCE STANDARD (origin)
Directive on the safety of toys 2009/48/EC
Standard EN 71-1-2-3
Information:
Directive on WEEE - RAEE 2003/108/EC
Directive on RoHS 2011/65/UE - EN 50581:2012
Reg. (CE) n.1907/2006 (Reach) allegato XVII-51
&52 phthalates in toys
The vehicle is not compliant with the requirements
of road transport standards and consequently
cannot travel on public roads.
DECLARATION of CONFORMITY
Peg Perego S.p.A. declares under its own
responsibility that the item in question has been
subjected to internal operational tests and
approved according to the standards in force at
external, independent laboratories.
PLACE AND DATE OF ISSUE
Italy - 30. 03. 2018
Peg Perego S.p.A.
via A. De Gasperi 50
20862 Arcore (MB) – ITALIA
SAFETY STANDARDS
Our toys are compliant with European Safety
Standards for toys (safety requirements stipulated by
the EEC Council) and with the "U.S. Consumer Toy
Safety Specification". They are also certified by
notified toy safety bodies in accordance with
Directive 2009/48/EC. They are not compliant with
the requirements of road transport standards and
consequently cannot travel on public roads.
• A child must be 2 year of age or older for the
necessary coordination and maturation to operate
this motorized vehicle safely.
• WARNING! Using the product on public roads,
in narrow spaces or near watercourses and
swimming pools may cause injury to the users
and/or third parties. Adult supervision is always
necessary.
• The product is not suitable for transporting
people.
• Children must always wear shoes when using the
product.
• When the product is in operation, make sure that
children do not put their hands, feet, other body
parts, clothing or other objects close to the
moving parts.
• Do not use petrol or other flammable substances
near the product.
MAINTENANCE AND CARE
• Regularly check the state of the product. Do not
attempt to use it if there are any faults. Only use
original PEG PEREGO spare parts for repairs.
• PEG PEREGO will accept no liability for products
that have been tampered with.
• Do not leave the product near sources of heat
such as radiators, stoves or fireplaces.
• Protect the product from water, rain, snow, etc.
• Regularly use light oil to lubricate moving parts
such as bearings and steering mechanisms.
• The surface of the product can be cleaned with a
damp cloth. If necessary, use a non-abrasive
household cleaning product. The cleaning must be
carried out by adults only.
• Never disassemble the mechanisms in the product
unless authorized by PEG PEREGO.
RULES FOR SAFE DRIVING
For the safety of your child, before using the product,
read the instructions below and follow them carefully.
• Teach your child how to use the product properly
for safe and enjoyable driving.
• The toy must be used with caution, as it requires
substantial dexterity in order to avoid falls or
collisions which could cause injuries to the user or
third parties.
• Before starting, check that there are no people or
objects obstructing the vehicle's path.
• Brake in good time to avoid collisions.
WARNING!
• Check that all the wheel fixing studs/nuts are
fastened properly.
CUSTOMER SERVICE
PEG PEREGO offers an after-sales assistance
service, directly or through a network of
authorized assistance centres, for any repairs or
replacements and the sale of original spare parts.
To contact a service center, visit our website:
http://www.pegperego.com
The item's serial number must always be quoted.
See the page on spare parts to find out how to
identify the serial number.
ASSEMBLY INSTRUCTIONS
WARNING
ASSEMBLY MUST ONLY BE CARRIED OUT BY
ADULTS. TAKE CARE WHEN REMOVING THE
VEHICLE FROM ITS PACKAGING. ALL THE
SCREWS AND SMALL PARTS ARE CONTAINED IN
A BAG INSIDE THE PACKAGING.
Do not use the toy if you find it damaged after
opening the packaging. Contact the shop where you
bought it or the customer support centre.
Take care in the presence of children while
assembling the toy, given the risks caused by small
parts (ingestion hazard) and the plastic bags that
contain them (choking hazard).
To assemble the toy, you will need a flat-head
screwdriver, a Phillips screwdriver, a hammer, and a
pair of pliers.
ASSEMBLY
1 • Insert one of the 4 self-locking washers (the
tractor comes with 2 spare washers) into the
special tool provided with the tractor.
ATTENTION: the tabs on the self-locking washer
must be turned towards the interior of the tool
(see detail A).
2 • Remove the axle from the packing. Remove the
protective caps from the axle. Insert the axle by
pounding the special tool all the way in using a
hammer. Remove the tool.
3 • Push both wheel trims onto the wheels (on the
side without bushing). Slide the following onto
the axle in this order: washer, wheel, other
wheel, washer.
PLEASE NOTE: make sure that the wheels are
fitted correctly, with the hub caps facing
outwards.
4 • Place a self-locking washer in the special tool,
and insert the prepared axle, pounding it all the
way in.
5 • Attach the wheel unit to the base of the trailer
by pressing on it.
6 • Insert the red pin into the end of the trailer.
7 • Attach the 2 hubcaps to the wheels on the
trailer.
8 • Place the cover of the red latch.
9 • Join the spring and red latch as illustred.
10 • Insert them into the slot.
11 • Insert the lever.
12 • Align all the holes and insert the pin.
13 • Fasten the pin with a stud by pressing on both
sides.
14 • Unscrew the 2 screws that are in the chassis. Put
the container in place and tighten the 2 screws.
15 • Position the flap and fasten it from the inside by
using the plugs provided.
16 • Cover with caps on the outside
17 • To hook up the trailer: Insert the red hook into
the hole provided behind the tractor and turn it
as shown in the drawing.
18 • To release and tip the dumper, lover the lever in
the direction of the arrow.