MHZ PowerView Surface Kit Manual De Instrucciones página 25

Vertical Blind Programming Guide
PowerView® I
Set end positions (set open end position)
20 cm
Press Motor button and keep
pressed.
Additionally, press Open
button. Make sure that the
desired channel has been
set on the remote control.
Release Motor button.
Using the Move buttons, move
the first slat about 20 cm away
from the bundle.
Press Open button to open
the blind.
Motor automatically stops
as soon as the mechanical
end position is reached.
EN
Blind briefly moves once.
Caution: Move motor right
to the end of the head rail
Continues on next page 25