Enerpac GBJ Serie Hoja De Instrucciones página 2

2.3 Additional Bottle Jack Safety Precautions
1. Do not overload the jack. Load must not exceed the
jack's rated capacity.
2. Do not lift the load higher than necessary.
3. Do not place objects under the load being lifted by
the jack.
4. Do not apply force to any object being lifted by the jack.
5. Remove the pump handle from the handle socket
on jack when not in use. Use only the pump handle
supplied with the jack or an exact replacement of the
same specifi cations.
6. Do not remove the jack oil fi ll/air release plug for any
reason unless jack is fully lowered.
4.0 SPECIFICATIONS
◆
Capacity
Model
tons [kN]
GBJ-002 2 [19.6]
GBJ-002L 2 [19.6]
GBJ-003 3 [29.4]
GBJ-005 5 [49]
GBJ-008 8 [78.4]
GBJ-010 10 [98]
GBJ-010S 10 [98]
GBJ-015 15 [147]
GBJ-020 20 [196]
GBJ-020S 20 [196]
GBJ-030 30 [294]
GBJ-050 50 [490]
GBJ-100 100 [980]
Notes:
◆ Capacities shown in tons are nominal, values in kN are actual.
✽ Jack model not equipped with extension screw.
Dimensions shown are approximate. All product specifi cations are subject to change without notice.
2
Max.
Min. Height
Stroke
inch [mm]
inch [mm]
3.94 [100] 6.30 [160]
18.11 [460] 22.44 [570]
4.13 [105] 6.61 [168]
5.91 [150] 8.35 [212]
5.91 [150] 8.62 [219]
5.91 [150] 8.62 [219]
2.44 [62] 5.16 [131]
5.91 [150] 8.98 [228]
5.91 [150] 9.21 [234]
4.13 [105] 7.48 [190]
5.91 [150] 9.53 [242]
5.91 [150] 9.92 [252]
5.91 [150] 11.81 [300]
7. Never attempt to service, repair or adjust the jack
while it is supporting a load.
8. Use the jack only in ambient temperatures between
-4 to 158°F [-20 to +70°C].
9. Allow only trained and qualifi ed hydraulic specialists
to inspect and repair the jack. Use only genuine
Enerpac replacement parts and Enerpac HF Series
hydraulic oil.
3.0 RECEIVING INSTRUCTIONS
Visually inspect all components for shipping damage.
Shipping damage is not covered by warranty. If shipping
damage is found, notify carrier at once. The carrier is
responsible for all repair and replacement costs resulting
from damage in shipment.
Max. Max. Pump
Height Handle Force
inch [mm] lb [kgf]
12.20 [310] 88.2 [40]
40.55 [1030] 88.2 [40]
13.31 [338] 103.6 [47]
17.20 [437] 110.2 [50]
17.48 [444] 88.2 [40]
17.48 [444] 88.2 [40]
8.78 [223] 88.2 [40]
17.83 [453] 88 2 [40]
18.07 [459] 88.2 [40]
13.78 [350] 88.2 [40]
18.39 [467] 88.2 [40]
15.83 [402] 88.2 [40]
17.72 [450] 66.1 [30]
Ext. Screw
Net Weight
Height
lb [kg]
inch [mm]
1.97 [50] 7.9 [3.6]
✽
21.1 [9.6]
2.56 [65] 9.0 [4.1]
2.95 [75] 11.0 [5.0]
2.95 [75] 13.0 [5.9]
2.95 [75] 14.3 [6.5]
1.18 [30] 12.1 [5.5]
2.95 [75] 19.8 [9.0]
2.95 [75] 26.7 [12.1]
2.17 [55] 22.0 [10.0]
2.95 [75] 34.2 [15.5]
✽
62.8 [28.5]
✽
191.8 [87.0]
This tool conforms with the
requirements for CE Marking.
Base Area
inch [mm]
3.74 x 4.37
[95 x 111]
5.00 x 5.00
[127 x 127]
3.74 x 4.57
[95 x 116]
3.74 x 4.84
[95 x 123]
3.74 x 5.43
[95 x 138]
3.74 x 5.59
[95 x 142]
3.74 x 5.59
[95 x 142]
4.41 x 6.42
[112 x 163]
5.00 x 6.73
[127 x 171]
5.00 x 6.73
[127 x 171]
5.59 x 7.72
[142 x 196]
7.09 x 9.06
[180 x 230]
11.65 x 13.11
[296 x 333]