Protecting The Environment; Ec Declaration Of Conformity - Black and Decker KS710LK Manual De Instrucciones

Regularly clean the ventilation slots in your tool using a soft
brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Occasionally apply a drop of oil to the axle of the blade
support roller.
Replacing the batteries (fig. F)
Remove the battery cover (20).
Remove the old batteries.
Place the new batteries as indicated.
Refit the cover.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual.
Alternatively, a list of authorised Black & Decker repair agents
and full details of our after-sales service and contacts are
available on the Internet at: www.2helpU.com
Technical data
Input voltage
Power input
Number of strokes (no load)
Max. depth of cut
Wood
Steel
Aluminium
Laser properties:
Wave length
Laser power
Weight

EC declaration of conformity

Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, EN 60745, EN 60825,
EN 55014, EN 61000
L (sound pressure) 88 dB(A), L
pA
hand/arm weighted vibration 5,7 m/s
K (sound pressure uncertainty) 3 dB(A),
pA
K (acoustic power uncertainty) 3 dB(A)
WA
Spennymoor, County Durham DL16 6JG,
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24 months
from the date of purchase, Black & Decker guarantees to
replace defective parts, repair products subjected to fair wear
and tear or replace such products to ensure minimum
inconvenience to the customer unless:
ENGLISH
KS710L
V 230
AC
W 710
-1
min 800-3,100
mm 85
mm 8
mm 12
nm 630-680
mW 1
kg 2.38
KS710L
(acoustic power) 99 dB(A),
WA
2
Kevin Hewitt
Director of Consumer Engineering
United Kingdom
1-8-2006
7