Part Names And Functions Of The Remote Control - Yamaha ESB-1080 Manual De Instrucciones

Part names and functions of the remote control

The part names and functions of the supplied remote control are as follows.
a
b
c
d
e
f
g
h
Turn on/off the unit.
The indicator for the last input source selected
i
glows.
j
（p.39）
k
l
Select an input source to be played back.
m
• HDMI : Sound from a device connected to
the HDMI IN jack (p.25)
• TV : TV audio (p.23)
• ANALOG : Sound from a device
connected to the ANALOG input jack
(p.25)
• BLUETOOTH : Sound from a Bluetooth
device (p.33)
Switch to surround playback (p.29).
Switch to 3D surround playback (p.29).
21
Indicate audio signal information of the input
source being played or bass extension
setting (p.35).
Hold down the key for more than 3 seconds
to enable/disable the Bluetooth standby
function (p.39).
Adjust the volume of the subwoofer (p.27).
Mute the audio output (p.27). Press the key
again to unmute.
Switch to stereo (2-channel) playback
(p.29).
Enable/disable the clear voice function
(p.30).
Change the brightness of the indicators
(p.37).
Enable/disable the bass extension function
(p.30).
Adjust the volume of the unit (p.27).
En