Child Lock; After Washing; 6/Maintenance And Cleaning; Cleaning The Housing - Selecline MFE50-JU806 Manual De Utilización

5.1.2.3 Child Lock

The child lock is designed to prevent children from operating the
appliance.
Choose the
Start
programme
Caution!
The "Child Lock" can only be released by pressing and holding the two buttons.
The "Child Lock" will lock all buttons except the power button and the "Child
Lock" button.
Release the "Child Lock" before selecting a program and starting a washing
cycle.
5.1.2.4 Temperature
The available temperature settings are: Cold, 20°C, 30°C, 40°C, 60°C, 90°C

5.1.3. After Washing

The buzzer will beep and the door lock and [Start / Pause] lights will flash, or two
small points will flash on the digital screen.
6/ MAINTENANCE AND CLEANING
Warning!
Before performing maintenance tasks, unplug the machine and turn off the tap.

6.1 Cleaning the housing

Regular maintenance can extend the working life of the
appliance. The surface of the appliance can be cleaned with
diluted, non-abrasive neutral detergents when necessary.
If there is any water overflow, use a wet cloth to wipe it off
immediately. Do not allow the housing to come into contact
with sharp items.
Note!
Do not use formic acid and its diluted solvents or equivalent,
such as alcohol, solvents or chemical products.

6.2 Cleaning the drum

Rust inside the drum caused by metal items should be removed immediately with
chlorine-free detergents.
Never use steel wool.
Note!
Do not place any garments in the washing machine while cleaning the drum.
Press and hold the
for 3 seconds until the buzzer beeps.
22
and buttons