Cleaning The Inlet Filter; Cleaning The Detergent Dispenser - Selecline MFE50-JU806 Manual De Utilización

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
6.3 Cleaning the door seal and glass
Wipe the glass and seal after each washing cycle to
remove lint and stains. The build-up of lint can cause
leaks. Remove any coins, buttons and other objects
from the seal after each wash.

6.4 Cleaning the inlet filter

Note!
The inlet filter must be cleaned if the water flow becomes restricted.
Clean the detergent dispense every 3 months to ensure the normal operation
of the appliance.
6.4.1 Cleaning the filter in the tap
1. Turn off the tap.
2. Remove the water supply hose from the tap.
3. Clean the filter.
4. Reconnect the water supply hose.
6.4.2 Cleaning the filter in the washing machine
1. Unscrew the inlet pipe from the rear side of the
machine.
2. Pull out the filter with long nose pliers and
replace it after washing.
3. Use the brush to clean the filter.
4. Reconnect the inlet pipe.
Note!
You can pull the filter out of the pipe for cleaning.
Reconnect and turn on the tap.

6.4.3 Cleaning the detergent dispenser

1. Press the button on the softener cover inside the dispenser drawer in position
A (see arrow in figure 1).
2. Lift the clip and remove the softener cover. Wash all grooves under running
water.
3. Replace the softener cover and push the drawer back into position.
Pull out the
dispenser drawer
dispenser drawer
by pressing A
Clean the
Clean inside the
recess with an old
under running
toothbrush
water
23
Insert the
dispenser drawer

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido