Selecline MFE50-JU806 Manual De Utilización página 25

6.5 Troubleshooting
The appliance does not start working or stops during operation.
Try to find a solution to the problem. If this is not possible, contact customer
service.
Description
Washing machine
does
not start
Door cannot be
opened
Water leakage
Detergent residue
in the detergent
dispenser
Indicator or display
does not light up
Abnormal noise
Error display
Pause/Start
No Spin
Pause/Start & No
Spin
Extra Rinse
Note!
After checking, switch the washing machine on again. If the problem persists,
contact customer service.
Reason
Door is not closed
properly
Safety protection is
enabled
Connection between
inlet pipe or outlet
hose is not tight
Detergent is damp
or clumped together
CPU or harness is
disconnected
Reason
Door is not closed
properly
Water inlet problem
while washing
Draining takes too
long
Water overflow
Other
25
Solution
Restart after the door is closed
Check if the clothes are stuck
Disconnect the power, then
restart
Check and fasten water pipes
Clean outlet hose
Clean the detergent dispenser
Check for power failure and
properly connected plug
Check if the fixing bolts have
been removed
Check for level floor
Solution
Restart after the door is closed
Check if the clothes are stuck
Check if the water pressure is
too low
Straighten the water pipe
Check if the inlet valve filter is
blocked
Check if the drain hose is
blocked
Restart washing machine
If the problem cannot be
solved, call customer service