Sauder 427470 Manual Del Usuario página 16

Step 11
å
Carefully turn your unit over onto its left edge.
å
Fasten the SKIRTS (G) to the ANGLE BRACKETS on the
UPPER TOP (H) and BOTTOM (K). Use six BLACK 9/16"
LARGE HEAD SCREWS (1S).
å
NOTE: There are no pre-drilled holes in the SKIRT. The
SCREWS will tighten into the groove.
H
G
Page 16 427470
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
The groove
is closer to
this edge.
K
G
www.sauder.com/service
1S