Hidden Cam; Cam Dowel; Cam Screw - Sauder 427470 Manual Del Usuario

Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM DOWEL

Cam Dowel

Arrow
Metal end

Hidden Cam

3.
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
HOW TO USE A HIDDEN CAM & CAM SCREW

Cam Screw

Arrow
Hidden Cam
www.sauder.com/service
Start
Arrow
1.
2.
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the
edge of the board.
Hole
1.
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the edge
of the board.
Turn the CAM SCREW until
the shoulder is against the
surface of the part.
3.
Insert the CAM SCREW into the HIDDEN CAM.
Tighten the HIDDEN CAM.
1
2
427470
2.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Hole
Tighten
Arrow
Maximum
210 degrees
Minimum
190 degrees
Page 5