Sauder 427470 Manual Del Usuario página 23

Step 18
å
Refer to the enlarged diagram to identify the parts on the HINGE.
å
The DOOR may need some adjustments. Follow the text below
to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOOR from side to side (horizontal), turn the
adjusting screw in or out.
å
To adjust the DOOR up and down (vertical), loosen both vertical
adjustment screws. Move the DOOR up or down to the desired
location. Tighten the screws after making adjustments.
å
To adjust the DOOR in or out (depth), loosen the mounting screw
one turn and move the DOOR in or out, as needed. Tighten the
mounting screw after making adjustments.
www.sauder.com/service
Mounting screw (depth)
(vertical adjustment)
The DOOR STOP is adjustable. If the front surfaces
of the DOORS are not aligned after making any
needed adjustments, turn the DOOR STOP left or
right until it allows the DOORS to evenly close.
427470
17
If you're doing this to
help a friend, don't
leave without a bite.
Adjusting screw (horizontal)
Page 23