• Apply grease to the pedal threads before installing, and if required by the pedal manufacturer, use pedal
washers. Pedal extenders are not recommended.
• Follow installation instructions carefully, as the left pedal is reverse threaded. Do not force pedal
threads, as irreparable damage may occur to the crank arm.
• Check pedal manufacturer's instructions for correct torque speciication.
Coniguring the bike
Before you can begin riding the Stages Bike, you must irst install the Stages Link app to connect to and
conigure the bike.
Stages Link app
If you do not yet have the Stages Link app installed on your mobile device, please download and install it
now. The app is a crucial requirement for bike coniguration, including irmware updates and necessary bike
settings. If you do not yet have a Stages Link account, create one now within the app.
Download Stages Link App:
Pre-coniguration check list
Once you have the app installed, check these three things before moving on towards coniguring your bike:
• Make sure the Stages Bike has power and all wiring connections are plugged in. See step #11 of the
assembly instructions to conirm bike has power by testing the brake function.
• Make sure the battery tabs are removed from both power meters.
• Spin the cranks to wake up the power meters.
Once these things are ready, navigate to the Stages Bike Manager section of the Stages Link app and con-
nect your bike. Upon initial connection, the app will walk you through setting up the bike, including conigur-
ing crank length and checking for any available irmware updates.
What's next
Now that you've completed assembly and set up, your Stages Bike is ready to set up bike it, connect to
devices, and more. Our online quick start guide and video tutorials will walk you through the next steps.
Visit our online user manuals to continue:
manuals.stagescycling.com
11