Maintenance And Cleaning - Stages cycling Stages Power L Manual Del Usuario

Troubleshooting
LR Power
When using a Stages Power LR unit, the left side serves as the main unit,
with the right side sending signals to the left. If the battery dies on one
side, the remaining power sensor can function as a single sided power
meter and continue providing power.
• When paired via ANT+, no action is required, as power meter will
automatically convert to single sided power meter after a period of
time receiving no signal from the opposing side.
• When paired via Bluetooth, the left power sensor will function alone
if the right side battery dies. If the left sensor battery dies, however,
simply add the right sensor as a new Bluetooth sensor.
Upon completion of the ride, replace the battery in the corresponding
side (see pages 3-4) to resume normal function of your LR power meter.
Support
Additional support content is available on the Stages Cycling website:
support.stagescycling.com

Maintenance and Cleaning

The only items of the power meter that can be serviced by the owner are
the battery, battery cover(s) and o-ring. No other items are serviceable
and no attempt should be made to adjust or alter any other items.
When cleaning the power meter, use only water dampened cloth to
wipe off dirt and debris. Never use any harsh cleaning chemicals that
may damage the plastic housing. Inspect the battery compartment to
ensure the battery contact is clean of any corrosion.
Never directly spray the power meter or battery door with high pressure
water.
11