Important Notice - Stages cycling Stages Power L Manual Del Usuario

• Battery: CR2032 – Approx. 150-200 hours use.
• Wireless transmission: 2.4GHz, ANT+™ and Bluetooth® Smart
• Accuracy: +/-2% of measured power
• Weight: 15g (L) / 20g (R) / 35g (LR)
• Power measurement range: (watts): 0-5000
• Cadence range (RPM): 10-220
• Water rating: IPX7
• Storage Temp: -30 to 60° C (-22 to 140°F); Dictated by typical lithium cell range.
• Operating Temp: -18 to 50°C (0 to 122°F)
Power Meter (crank arm) Installation
IMPORTANT NOTICE: To ensure power meter compatibility with
the frame and components, please follow these steps carefully and in
1. Attach the power meter crank arm(s) to the bike following the
instructions provided by the crank arm manufacturer. Links to
crank manufacturer's installation instructions may be found at:
support.stagescycling.com
2. Carefully and fully install the crank arm(s) onto the bike, but
DO NOT ATTACH THE PEDAL AT THIS TIME.
3. Carefully and slowly rotate the crank one full revolution to ensure
there is no contact between the power meter sensor housing and
any part of the frame or other components, as illustrated on pg. 5.
4. If there is interference between the power meter and the frame or
other components, contact your retailer for technical assistance.
5. If no interference is found, you may install the pedals according to
the pedal manufacturer's instructions.
6
www.thisisant.com/directory