Installing The Oven - F.Bertazzoni F45 CONXT Manual De Mantenimiento E Instalación

3172533-000 english-1st IT.qxd:-
Under no circumstances must the earth
wire pass through this switch.
• This switch may be replaced with a plug,
which must always be accessible in normal
working conditions.
After connecting the electricity, check that all
the electrical parts of the oven are working.
This appliance must be installed by a licensed
electrician in accordance with AS/NZS 3000
wiring rules and any local wiring rules, and a
Certificate of Compliance
completion. The main supply and interconnecting
cables required for installation must be rated at a
minimum 15A.

Installing the Oven

For all ovens and after carrying out the
electrical connection,
1 Insert the oven in the kitchen unit, making
sure the power lead is not trapped or in
contact with hot parts of the oven.
2 Fix the oven to the unit by means of the 2
screws supplied via the holes that can be
seen when the door is opened.
3 Check that the oven housing is not in contact
with the sides of the unit and that there is at
least 2 mm separating the neighbouring
units.
16/3/12 08:06
issued upon
Página 13
13