INCIDENT
A flashing symbol E:5 appears
on the temperature display
(2).
I have followed the above
instructions but the door
is still locked and
the oven is cold.
The door is locked, indicator
light (3) is on and 0:00 is
shown on the central display.
IMPORTANT
Should the oven door be still locked even though you have followed all these instructions, please con-
tact the Technical Assistance Service.
24
CAUSE
The oven's clock is set but
the oven door is locked.
No specific cause
During the cancellation
process, you have not waited
for the time to finish and have
opened the door too early.
SOLUTION
IMPORTANT
If the temperature inside
the oven is very high
(above 250 ºC), you will see
that E4 flashes but the time
does not start to count down.
You should wait
until the oven cools down,
when the countdown will
begin.
You will see the time left
before the oven can be used
again on the display (4).
When the display shows 0:00,
indicator light (3) will turn off
and you will be able to open
the oven door and use the
oven as normal.
Press sensors
and (12) at
the same time and the door
should unlock.
Touch the OFF sensor and
you will see the remaining
time on the display (4).