Din Head Unit Provision - Metra 99-75175 Instrucciones De Instalación

DIN HEAD UNIT PROVISION

1
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Fig. A)
2
Snap the pocket into the bottom
opening of the radio housing. (Fig. B)
3
Slide the aftermarket head unit into
the cage and secure. (Fig. B)
4 Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS.
5
Reassemble dash in reverse order
of disassembly.
99-7517S KIT ASSEMBLY
A
B
3