Kit Assembly; Din Radio Provision With Pocket - Metra 99-7519B Instrucciones De Instalación

DIN radio provision with pocket

1. Slide the Pocket into the bottom
section of the Radio Housing.
(Figure A)
2. Remove the metal DIN sleeve from
the aftermarket radio.
3. Slide the DIN sleeve into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure B)
4. Slide the aftermarket radio back
into the sleeve until it clicks in.
(Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
radio for proper operation.
6. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
99-7519B
(Figure B)
5
(Figure C)