Kit Assembly; Double Din Radio Provision - Metra 99-3305 Instrucciones De Instalación

1. Slide the double DIN bracket into the
trim plate aligning the holes in the
trim plate to the clips on the bracket.
(Figure B)
Note XL-7 ONLY: Trim top corners
of radio housing. (Figure A)
2. Slide the double DIN radio unit into
the trim plate bracket assembly and
secure the unit to the kit using the
screws supplied with the head unit.
(Figure C)
(Figure A)

Kit Assembly 95-3305

Double DIN radio provision

3. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
4. Reassemble dash in reverse order
of disassembly.
(Figure B)
(Figure C)
8