Iso Din Radio Provision With Pocket; Double Din Radio Provision - Metra 99-7342 Instrucciones De Instalación

ISO DIN radio provision with pocket

1. Attach the double DIN
brackets to the aftermarket
radio using the screws
supplied with the radio, then
secure the assembly to the
pocket using the (4) supplied
#8 Truss head screws.
(Figure A)
2. Locate the factory
wiring harness in the dash.
Metra recommends using the
proper mating adapter from
Metra or AXXESS. Re-connect
the negative battery terminal
and test the radio for
proper operation.
3. Mount the assembly into
the sub dash.
4. Reassemble dash in reverse
order of disassembly.
Kit Assembly 99-7342
(Figure B)

Double DIN radio provision

1. Attach the double DIN
brackets to the aftermarket
radio using the screws
supplied with the radio.
(Figure B)
2. Locate the factory
wiring harness in the dash.
Metra recommends using the
proper mating adapter from
Metra or AXXESS. Re-connect
the negative battery terminal
and test the radio for
proper operation.
3. Mount the assembly into the
sub-dash.
4. Reassemble dash in reverse
order of disassembly.
5
(Figure B)