Storage Recommendations - DeWalt DCB116 Manual De Instrucciones

NOT CONTINUE to use under these conditions. Follow the
charging procedure. You may also charge a partially used pack
whenever you desire with no adverse affect on the battery pack.
5. Foreign materials of a conductive nature such as, but not limited
to, grinding dust, metal chips, steel wool, aluminum foil, or any
buildup of metallic particles should be kept away from charger
cavities. Always unplug the charger from the power supply
when there is no battery pack in the cavity. Unplug charger
before attempting to clean.
6. Do not freeze or immerse charger in water or any other liquid.
WARNING: Shock hazard. Don't allow any liquid to get inside
charger. Electric shock may result.
CAUTION: Burn hazard. Do not submerge the battery pack in any
liquid or allow any liquid to enter the battery pack. Never attempt to
open the battery pack for any reason. If the plastic housing of the
battery pack breaks or cracks, return to a service center for recycling.

Storage Recommendations

1. The best storage place is one that is cool and dry away from
direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully charged battery
pack in a cool dry place out of the charger for optimal results.
NOTE: Battery packs should not be stored completely depleted of
charge. The battery pack will need to be recharged before use.
Cord Storage (Fig. 1)
There are two pegs (h) on the side of the charger that act as a cord
wrap for safe storage of the cord when the charger is not in use.Simply
wrap the cord around the outside of both pegs and tuck the end of the
cord into itself so it won't come undone.
Locking charger (Fig. 1)
Your charger gives you the ability to lock it to keep your batteries
secure. Close the lid (a) and fasten the locking latches (b), slide a lock
through the lock hole (g), and secure the lock.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
Repairs
The charger and battery pack are not serviceable. There are no
serviceable parts inside the charger or battery pack.
READ ALL OF THE INSTRUCTIONS IN THE BATTERY
CHARGER SECTION
ATTEMPTING TO CHARGE THE BATTERY PACK FOR YOUR TOOL.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by certified service centers
or other qualified service organizations, always using identical
replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
• CONFIRMATION OF OWNERSHIP: In case of an insurance loss,
such as fire, flood or theft, your registration of ownership will serve
as your proof of purchase.
• FOR YOUR SAFETY: Registering your product will allow us to
contact you in the unlikely event a safety notification is required
under the Federal Consumer Safety Act.
Register online at www.dewalt.com/register.
6
OF THIS MANUAL BEFORE