o v e r v i e w
24 cities
World time scale
Upper hand
Hour hand
BUTTON C
4th Center hand
Second hand
NOTE: Your watch is equipped with a screw-down crown for greater
water resistance. Before adjusting any of the time or date settings
release the crown by first unscrewing it from the case in a counter-clock-
wise motion.
Your TX™ watch crown has three positions, closed, middle and outer. To
accustom yourself to the difference between the various positions
extend the crown to its outer position and then push the crown very
lightly until you feel it click into the middle position.
Minute hand
BUTTON A
Date window
Closed position
Middle position
Outer position
CROWN
Season scale
BUTTON B
Lower hand
2
d a t e
a n d
t i m e
s e t t i n g
To set the date and time:
1) Pull the crown to its middle position and turn it clockwise until the
correct date appears in the date window.
2) Pull the crown to its outer position and turn it until the correct time is
shown. Ensure that the AM/PM setting is correct by verifying that the
date changes at midnight, not noon.
3) Push the crown in when finished.
For months with fewer than 31 days, the date will need to be adjusted.
i n d i c a t o r h a n d ( 4 t h c e n t e r h a n d ) a d j u s t m e n t
To readjust a misaligned indicator hand:
1) Pull the crown to its outer position. The upper and lower hands reset
to the ends of their sweeps, automatically.
2) The 4th center hand should point to 12 o'clock. If it does not within
5 seconds of pulling the crown to its outer position, press A or B to
move the hand counterclockwise or clockwise, respectively, until it
points to 12 o'clock.
3) Push the crown in when finished.
NOTE: If no button is pressed for five seconds after the hands stop, the
watch proceeds to the world time setting operation (see WORLD TIME
SETTING).
3