Soehnle Tendence Instrucciones De Empleo página 13

WEIGHING
For the most accurate measu-
rements, always step on the
scale without clothing and
under the same conditions
(e.g. in the morning, sober,
and after using the toilet).
1. Step on scale.
The weight is displayed.
2. After automatic recognition
of the person, the individual
memory slot (P1 – P4) will
be displayed in addition to
the body weight.
3. Following this, the differen-
ce ( ) between the star-
ting weight and the current
weight will be displayed.
Once the desired weight has
been reached, the
bol will also appear in the
display.
4. In the next step, the change
of your weight and the
approach of your desired
weight will be displayed in
a concise trend curve. The
current maximum and mini-
mum values (rounded)
will also be displayed.
5. The scale will then
automatically switch off.
6. One of the features of this
trend weight scale is the
automatic recognition of
different persons. If several
persons with a very similar
weight use this scale, the
manual selection of
individual memory slots will
be required.
The memory slots for persons,
which cannot be recognized,
will be displayed. Since
weight measurement is alrea-
dy completed, you may now
step off the scale and use the
▼-key (left memory slot) or
▲-key (right memory slot) to
select your individual memory
slot.
In very rare cases, the measu-
red value might be allocated
to the wrong person. This will
falsify the trend curve.
Automatic recognition will
also not be possible if a
difference of over ± 3 kg is
measured between individual
weighing processes.
This might happen if you
wait several days between
weightings or if you wear
-sym- clothing of different weight.
In such an event, simply
repeat the data entry for your
individual memory slot, as
described in Data Entry.
Past measurements are main-
tained.
Please be sure to step onto
the scale immediately after
changing your personal data.
Otherwise, the change will
not be stored.
13
2.
3.
4.
Desired/Target weight curve
6.
▼-key ▲-key