Data Entry - Soehnle Tendence Instrucciones De Empleo

GB
3.
4.
5.
6.
7.

DATA ENTRY

For the correct functionality
of the trend weight scale, it is
necessary to enter the perso-
nal, desired or target weight
of the respective person and
to immediately step on the
scale once this value is enter-
ed.
This scale is equipped with
an energy savings mode and
will automatically switch off
if no keys are pushed for
approx. 40 seconds.
1. To enter data, place scale
on a table.
2. Start data entry using the
key .
3. Select memory slot
(P1 ... P4)
(▼ = minus, ▲ = plus)
and confirm using (
Memory slots, which are
already programmed, are
displayed with the
-symbol.
4. Enter the desired weight
(▼ = minus, ▲ = plus)
and confirm using (
5. Confirm the display "OK"
using the ( )-key.
12
6. As soon as "0.0" appears
in the display, the person
must step on the scale for
the initial weighing.
7. The current weight (star-
ting weight) is displayed.
The scale will then auto-
matically switch off.
If no load is put onto the
scale, "Error" will appear
in the display after 40
seconds and the scale will
automatically switch off.
).
).