Sony CDP-CX235 Manual De Instrucciones página 17

6
To program other discs/tracks, do the following:
To program
All tracks of another disc(s)
Other tracks on the same disc
Other tracks on other discs
7
Press · to start Program Play.
To cancel Program Play
Press CONTINUE.
Checking the programmed order
You can check your program before or after you start
playing.
Press CHECK.
Each time you press this button, the display shows the
disc and track number of each step in the programmed
order. (When a whole disc is programmed as one step,
"ALL" appears instead of the track number.) After the
last step in the program, the display shows "– END –"
and returns to the original display.
Changing the programmed order
You can change your program before you start playing.
To
You need to
Erase a track or disc
Press CHECK until the track or
disc you do not want appears in
the display, then press CLEAR
Erase the last track or
Press CLEAR. Each time you
disc in the program
press the button, the last track or
disc will be cleared.
Add tracks or discs to the
Follow the programming
end of the program
procedure
Change the whole
Hold down CLEAR until
program completely
"CLEAR" appears in the display
to erase the whole program, then
create a new program following
the programming procedure
Erasing the program stored in memory
1
Press PROGRAM repeatedly in the stop mode
until the program number (PROGRAM 1, 2 or 3)
you want to erase appears in the display.
2
Hold down CLEAR until "CLEAR" appears in the
display.
Repeat Steps
2 to 4
5
2 to 5
Playing CDs
Getting Started Playing CDs
GB
17