Gessi RETTANGOLO 26691 Manual De Instrucciones página 2

1 - WARNING!! PLEASE TAKE NOTICE THAT THE WALL - FLOOR AND CEILING MOUNTED
PRODUCTS requires a European GAS water connection. Do not connect the European GAS
connection directly to an American standard NPT water connection for any reason whatsoever as
it may cause dangerous leakages of gas and / or water. Use adaptors GAS/NPT.
2 - WARNING!! PLEASE TAKE NOTICE THAT the suggested maximum pressure and/or temperature
MUST NEVER BE EXCEEDED, as it may damage and/or cause ruptures and/or leakages and/
or even break the product, and present a potential hazard and danger to safety, health and/
or property. Following are the technical data with respect to the installation of Gessi plumbing
products.
► W orkingpressureshouldnotbelowerthan0,5bar(7,25psi)andnotbehigherthan5bar(72Psi).
In case of higher working pressure use a pressure reducer valve.
►Maximumtestinstallationpressure:8bar(116psi).
► A void major pressure differences between hot and cold water supply. Differences in pressure,
water with high mineral content, and soapy substances can corrode the internal and external parts
of the hoses and slowly weaken the materials thereby causing leakage.
►MaximumworkingtemperatureforGessiproductsis70°C(158°F).
3 - WARNING!! PLEASE TAKE NOTICE THAT the product should never be used as a tool, hammer
or for any purposes other than the one it has been designed for.
4 - WARNING!! PLEASE TAKE NOTICE THAT the product should always be installed and tested by
a professional plumber.
5 - WARNING!! PLEASE TAKE NOTICE THAT electric cables should never be attached to the
product as they may present a health and safety hazard.
6 - WARNING!!PLEASETAKENOTICETHATheavyobjectsshouldneverbeplacedonordropped
on the product as they may damage the same and cause splinters, which may present a health
and safety hazard.
7 - WARNING!! PLEASE TAKE NOTICE THAT the instructions manual should carefully read before
installation and the installation procedure provided therein must be properly followed and complied
with.
8 - WARNING!! PLEASE TAKE NOTICE THAT during installation the use of excessive force should
be avoided in order to prevent damage to the product and/or its components and pieces. NEVER
force a component or piece into another. NEVER force screws or over tighten screws.
CAUTION - WARNING
2