IN & OUT HOUSE EF172D Instrucciones De Operación página 33

E N
2 .2 Use model EF173D as an example. Prepare the wall with a framed opening
of 1125 mm wide and 460 mm tall. Ensure a width of 76 mm between the wood-
en blocks on both sides to which the fireplace is attached. Ensure that the
wooden block width on both sides measures around 37.5 mm after finishing the
plasterboard. Measure the depth D from the plasterboard surface to the wood-
en block and make a note of this.
4 6 0 M M
M O D E L E F172 D
A 925
2 .3 Take the two mounting brackets and use the four ST4 x 10 screws and four
washers to attach the mounting brackets to the left and right side wall. Ensure
that the distance of the mounting bracket to the surface of the fireplace is the
same D to ensure that the surface of the combustion chamber is not lower than
the surface of the plasterboard.
A
PL AS T E R BOA R D
E F173 D
1125
D
37,5 M M
E F174 D
1425
6 M M
E F175 D
1625
D
33