Warranty Terms And Conditions - XCLEAR Surface Handheld Manual

7. Carefully irradiate the surface. Do this from top to bottom and from left to right, see the front
of the manual (how to use). Do not move the device too quickly over an object, see the graph
at the beginning of the manual to determine the distance and speed. We recommend using
a distance of 10 cm from the surface. Make sure that the objects are irradiated at different
angles. Shaded areas are not disinfected. A surface can be irradiated several times. (Prolonged)
exposure to UV-C radiation can damage products.
8. Switch off the device when you have finished disinfecting the surface (Figure 5).
PLEASE NOTE: the lamp and the unit can stay warm for a while (+/- 10 min). Make sure that
everything has cooled down before storing the unit (Figure 7).
REPLACING THE UV-C LIGHT SOURCE
1. Make sure that the device is switched off (Figure 5) and the device is de-energised (Figure 6).
2. Make sure that the unit and lamp have cooled down (Figure 7).
3. Put on the gloves provided. These gloves are for lamp protection and do not protect your
hands against glass breakage.
4. Remove the lamp base from the socket. Press in the spring by pushing the lamp towards the
rear. Unpack the lamp and replace it if necessary (Figure 8).

WARRANTY TERMS AND CONDITIONS

This product is guaranteed against manufacturing defects for 2 years from the date of purchase.
The lamp is not included in the guarantee. Warranty cases can only be processed if the product is
returned carriage paid and accompanied by valid proof of purchase. Warranty claims caused by
installation or operating errors will not be acknowledged. Defects caused by faulty maintenance
are not covered by the warranty. Warranty repairs may only be carried out by the supplier. The
supplier and manufacturer cannot be held liable for consequential damage resulting from failure,
inadequate maintenance or incorrect use of the device. The warranty is void if additional features
are added, or changes are made, to the product that are not part of the standard equipment.
| SURFACE
12