Replacing The Interior Light - Dometic GROUP Waeco CoolMatic HDC195 Instrucciones De Montaje Y De Uso

HDC195, HDC225 Using the refrigerator
8.4

Replacing the interior light

If the interior light in the refrigerator is defective, you can change the bulb
(LED bulb, E14, 12/24 Volts, 1.2 watts).
HDC195
To do this, proceed as follows (fig. e, page 15):
➤ Disconnect the power supply.
➤ Press the moving part to detach the light cover (1).
➤ Take off the light cover (2).
➤ Replace the bulb with a new one.
➤ Attach the light cover.
➤ Reconnect the refrigerator to the power.
HDC225
To do this, proceed as follows (fig. f, page 15):
➤ Disconnect the power supply.
➤ Undo the screws in the light cover.
➤ Remove the cover.
➤ Unscrew the bulb from the socket.
➤ Screw the new bulb into the socket.
➤ Attach the light cover.
➤ Reconnect the refrigerator to the power.
49
EN