Pinolino Enzo Instrucciones De Montaje página 5

C1
D1
Detail 1, 2
•
Detail 1, 2
•
Détail 1, 2
•
Detalle 1, 2
•
Dettaglio 1, 2
•
Detail 1, 2
1 x
D
E1
1 x
KD
24
4 x
WDH 8/35
2 x
WKG und
2 x
WK und
• and • et • y • e • en
2 x
M 6 und
• and • et • y • e • en
1 x
WS
1
1 x
BO
1 x
WI
2
5 x
VS 4/40
Warning:
Make sure that the bed is not in the close proximity of open fires or strong heat sources, e.g. electric heaters, gas stoves.
Keep the assembly plan and the hex key for future disassembly or assembly.
Maintenance:
Wipe with a clean, damp cloth. For details, see also www.pinolino.de.
What else you should know:
In producing our furniture and toys we only use materials, oils, varnishes and glazes that do not pose a health hazard and are
appropriate for children's furniture. As a result of the production process, new furniture can sometimes retain a specific odor. To
counter this harmless inconvenience we recommend repeated venting.
For service cases:
If, despite constant supervision of the production process, a flaw should turn up, please mark the respective part clearly in this
• and • et • y • e • en
assembly plan. Print the Customer Service contact form from our website, www.pinolino.de. Shortly describe the flaw or the
problem. Send the complete assembly plan, a copy of the receipt and the Customer Service contact form, which you have filled in,
with the specification of the serial number (it can be found on the packaging, on the assembly instructions and on the article), to
our address below.
WITHOUT RECONSIGNMENT OF THIS ASSEMBLY PLAN AND OF THE RECEIPT,
POSSIBLE COMPLAINTS WILL NOT BE TAKEN INTO CONSIDERATION.
We wish you much joy with your Pinolino cot.
Manufactured by:
Pinolino
Kinderträume GmbH
Sprakeler Str. 397
D-48159 Münster
Fax +49-(0)251-23929-88
service@pinolino.de
www.pinolino.de
5