Troubleshooting - Fermax 1088 Manual De Instrucciones

INTERFACE TELEFONICO
INTERFACE TELEFONICO

TROUBLESHOOTING

DIAGNOSE LEDS
As said before, Telephonic Interface has 3 leds to indicate:
Green Led: It lights when call is
received and turns off when call ends.
In programming mode, it blinks when
a tone is detected. When call is
diverted, it blinks whenever a digit is
dialed.
PROBLEMS TO ENTER INTO PROGRAMMING MODE
START
18
USE PRG PWR
Yellow Led: It lights in programming
mode. When it blinks, it indicates that
divert is activated from the phone.
Red Led: It lights when the
interface is on.