Brandson Equipment 303842 Manual Del Usuario página 29

5. Installation
Take the appliance out of the packaging, remove any packaging material and check
the product for damage. The fan heater must be placed on a firm and flat surface.
Ensure that the heater is placed at least 1 m away from other objects, and not
directly below a socket. A socket should be available for supplying power to the
appliance.
Caution! Ensure that the appliance is not placed near any flammable materials and
fluids of any kind, or with the air discharge pointing in this direction.
6. Initial use
Connect the appliance to a 220-240V AC socket. To start the appliance, turn the
"Power regulator" at the top to the desired speed.
0
1
2
29
Fan is switched off
Only fan is switched on
First heating level
Second heating level
Second heating level with oscillation switched on
English