Swarovski Optik CTC 30×75 Manual De Instrucciones página 8

1.
DESCRIPTION
1 Turn-back eyecups
2 Adjustment ring
for focusing
3 Scale for estimation
of distance
4 Extension tube
5 Connection thread
for tripod
6 Stay-on case with
carrying strap
14
3
2
5
4
6
CTC / EN CTC / DE
2.
OPERATION
2.1 OPENING THE OBJECTIVE AND OCULAR LENS CAP
1
2.2 REMOVAL OF THE STAY-ON CASE
The spotting scope is placed in a stay-on case. The caps of
the stay-on case can be pushed to the side (without opening
the press studs) for observing. Alternatively, you can open
one of the press studs, move the caps to the side of the body
and then close the press stud again.
As the stay-on case size is perfectly sized to fit your spotting
scope a slight adherent-effect between the stay-on case and
the spotting scope may occur through time. Removing the
stay-on case can best be achieved by holding the spotting
scope with one hand and pushing the extendable spotting
scope from the eyepiece side forwards out of the stay-on
case.
CTC / EN CTC / DE
15