Freezer Features; Frost-Free System; Automatic Ice Maker (Some Models); Ice Service Rack (Some Models) - Sears Kenmore 69272 Manual De Uso Y Cuidado

Freezer Features
Frost-Free System
The refrigerator and freezer sections are compteteIy
frost-free. Defrosting is automatic under normal
conditions. Refrigerator and freezer sections never have
to be defrosted.
Automatic Ice Maker (some models)
Make sure ice bucket is in place and ice maker arm
is down.
>...
-%
__ Off
position
>Ice maker
arm
-_, \\
\k On
position
After freezer section reaches normal temperature,
the ice maker fills with water and begins operating.
Allow 24-48 hours after installation before first
harvest of ice. Ice maker produces 7 to 9 harvests of
ice in a 24-hour period under ideal conditions.
After ice is formed, ice maker drops ice cubes into
ice storage bucket. During ice production, ice maker
arm raises and lowers. When ice storage bucket is
full, ice maker arm turns ice maker off.
Ice Service Rack (some models)
nstall ice service rack by placing ice service rack on
washers and sliding down.
Washer
screw
Ice service
rack
[ cAuz,o. Jl
Make sure shelf is secure before placing items on shel
to avo d property damage.
Slideout Shelf (some models)
Slide out shelf pulis forward for easy access to items in
back.
Remove slideout shelf by sliding forward until bail
point beneath center rail catches in molding groove.
Grasp shelf by center rail, pull up, and remove.
Slide in until ball point falls into molding groove
Note: Discard first 3 harvests of ice so any impurities left
in the water line after installation are not consumed.
If you wish to stop automatic ice production lift ice
maker arm. A definite click is heard when proper
position is reached. Ice maker arm will remain in that
position until pushed down.
Center
rail
Bail
points
]2