Connecting And Charging - Braun Oral-B Smart 4750 Serie Manual De Instrucciones

Description
a Oral-B FlossAction
b On/off button
c Brushing mode button
d Handle
e Handle display
f SmartPlug charger (includes charging ring and SmartPlug)
g Base plate (depending on model)
h Protective cover (depending on model)

Connecting and charging

Your toothbrush has a waterproof handle, is electrically safe
and designed for use in the bathroom.
To assemble the charging unit, insert the protective cover (h)
on the back of the base plate (g). Then, place the base plate
on the charging ring (f) until it clicks into place.
• Plug the SmartPlug into an electrical outlet and place the
toothbrush handle (d) on the charging unit.
• A battery symbol should appear in the handle display (e).
The battery symbol will fill up while the handle is being
charged and «Charging» will be displayed. When the
handle is fully charged, the handle display shows «Full
Charge». A full charge takes at least 10 hours and enables
approximately 10 days of regular brushing (twice a day,
2 minutes).
Please note: If the battery symbol is not displayed
immediately, continue charging. It will appear in
10–15 minutes.
• When the rechargeable battery is low, the bars of the
battery symbol will disappear and «Low» will be displayed.
Your toothbrush will slow down and then stop. It is time
to recharge your Oral-B Professional Care. When the battery
is fully discharged, «Empty» is displayed. It will then need a
15-minute charge before you can use it for a 2-minute
brushing.
• For everyday use, the toothbrush handle can be stored on
the charging unit to maintain it at full power. There is no risk
of overcharging the battery. However, for environmental
reasons, Oral-B recommends to unplug the charging unit
until the next recharge is required.
® brush head
English
10 h 10 h
Full Charge Full Charge
5