SPORTSTECH TM400 Manual Del Usuario página 24

5. The other side of the hose (connection A) must be at the end of the pump marked "INFLATE". To
inflate your TM400 gym mat, all you have to do is turn on the pump. The supplied hand pump can
also be used as an option.
„DEFLATE"
ON / OFF
switch
6. WARNING: Never exceed the maximum pressure of 10 psi.
7. When the mat is fully inflated, remove the pump tubing. The valve closes automatically, the pin of the
valve moving upwards.
Connection A
8
psi
24
„INFLATE"
Connection B