Peg-Perego Viaggio Flex 120 Manual De Instrucciones página 24

Installing the booster seat in the vehicle
5. To release Viaggio Flex
120 from the vehicle seat,
pull the handle (1) and
the seat until the release
buttons on the side of the
2
base are fully revealed. In
so doing, the yellow release
buttons will be visible on
the sides of the base; pull
the two buttons (2) until
1
you hear the attachments
click open. At this point
you can remove the car
seat.
6.
To reposition the
connectors inside the base
1
(when not in use), pull the
lever once more (1) and
simultaneously push one
of the two connectors in (2)
until they disappear.
2
24