Bluetooth; Connecting The Headphones - Silvercrest SMBC 30 A1 Manual De Instrucciones E Indicaciones De Seguridad

SilverCrest SMBC 30 A1
®

9.10. Bluetooth

This operating mode lets you play music from an external Bluetooth
or media player) via the Micro Stereo System.
Switch the Micro Stereo System on and press the Operating mode button [16] multiple times
until the display [2] reads "BT", or press the

Use your external Bluetooth
User Manual of your external Bluetooth
"SMBC 30 A1" and establish the connection. If you are prompted for a PIN, enter "0000".
After the connection has been established, a confirmation beep can be heard.

Start playback on the external audio source.

In this operating mode you can adjust the volume both on the external audio source and on the
Micro Stereo System.

You can disconnect the connection on your external Bluetooth
the User Manual of your external Bluetooth® audio source. Alternatively, you can keep the
Play/Pause button [6] on the Micro Stereo System, or the Play/Pause button [50] or
the PAIR button [39] on the remote control pressed to disconnect.

9.11. Connecting the headphones

Set the volume to the lowest level before connecting headphones in order to
avoid damaging your hearing. You can then set the volume to the level you
want.
Be careful when using headphones. Listening to high-volume audio can
damage your auditory system.
Connect the headphones to the headphones jack [23] on the backside of the Micro Stereo
System. If the headphones are plugged in, the speakers [4 and 18] are automatically muted.
50 - English
button [32] on the remote control.
®
audio source to scan for Bluetooth
®
audio source. From the list of found devices, select
®
audio source (e.g. smartphone
®
devices. Please also read the
®
audio source. Please also read