To play an Audio CD, proceed as follows:
Press the Open/close CD tray button [3] on the Micro Stereo System or the
Open/close CD tray button [29] on the remote control to open the CD tray [1].
Insert an Audio CD into the CD tray [1].
Press the Open/close CD tray button [3] on the Micro Stereo System or the
Open/close CD tray button [29] on the remote control to close the CD tray [1]. The
number of tracks on the Audio CD is shown briefly on the display [2]. Then the first track is
played back automatically. Press the INFO button [28] during playback to show the Audio
CD total playback time for a few seconds on the display [2].
Instead of an Audio CD you can also use a MP3 CD. When using a MP3 CD,
please note the button functions described in chapter "9.7. USB".
The following buttons can be used for this operating mode:
Button
Play/Pause [6] or Play/Pause [50]
Play/Pause [6] or Play/Pause [50]
Stop [5] or Stop [36]
▸l [7] or ▸▸l [37]
l◂ [8] or l◂◂ [51]
Keep ▸l [7] or ▸▸l [37] pressed
Keep l◂ [8] or l◂◂ [51] pressed
Random playback [46]
Press Repeat [47] or MOD [14] once
Press Repeat [47] or MOD [14] twice
Press Repeat [47] three times
Press MOD [14] three times
Press MOD [14] four times
INTRO [49]
Numeric buttons [30]
SilverCrest SMBC 30 A1
Function
Playback
Pause
Stop
Next title
Previous title
Fast forward
Rewind
Random playback on/off
Repeat playback – 1 title
Repeat playback – full CD
Repeat off
Random playback on
Random playback off
INTRO function (all titles on the CD are
played for the first 10 seconds)
Direct title selection
English - 47