Led Signals; Technical Characteristics - Mottura 5471 Manual De Instrucciones, Uso Y Mantenimiento

Ref. 5471
1 flash of LED LD0 every 2 sec for
the entire duration of the travel
2 flashes of LED LD0
1 flash of LED LD0
11 flashes of LED LD0
4 quick flashes of LED LD0
repeated every 4 sec
LED LD0 flashes twice when any
button is pressed
• Transmission frequency: 868 MHz – 915 MHz.
• Two-way communication protocol M2net
• Light signalling emission of radio control and status of controlled systems
• Possibility of controlling up to 4 systems individually (REF. 5474)
• Possibility of controlling up to 4 systems at the same time (REF. 5471 - 5474)
• Built-in R. F. antenna
• Energy saving with auto shut-off after 4 seconds of inactivity
• Battery: 3V type CR2450
• Dimensions (mm): 60x98x14 (Art. 5471 e Art. 5474)
14

LED signals

Ref. 5474
1 flash of the LED assigned to
the system every 2 sec for the
entire duration of the travel
2 flashes of the LED assigned to
the system
1 flash of LED LD0
11 flashes of the LED assigned
to the system
4 quick flashes of LED LD0
repeated every 4 sec
LEDs LD1, LD2, LD3 and LD4
flash twice in sequence when
any button is pressed

Technical Characteristics

En 6
Z803 rA
Function
System in movement
Correct control execution
Transmitter entered Stand-by
mode
System malfunction.
Limit stops overlapped.
Low battery
No system is assigned to the
transmitter