SOUNDMASTER IR5500 Manual Del Usuario página 17

Language
Dimmer
Display
Power
Management
Sleep Timer
Buffer
Weather
Local Radio
Setup
Playback Setup
Device
Resume
When Power On
Software Update Update software. If there is an updated software version available, the
Reset to Default
English /Deutsch / Espanol / Francais / Portugese / Nederlands / Italiano /
Pyccknn / Svenska Norske / Dansk / Magyar /Cesky /Slovensky / Polski /
Turkce / Suomi
Power saving - backlight level
Turn On - backlight level
Color / Monochrome
Configure to go to standby mode automatically during in the menu or/ and
without Wifi signal. Choose the power management timer (5/15/30mins) to
set the duration of the radio to switch standby mode automatically when you
are not controlling it. Choose Turn off to ignore the power management
function.
Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes. Once
the time is set, there will be a bed icon with remaining minutes at the top
right corner and the device will turn to standby then.
Configure the buffer time of the music playback, 2 / 4 or 8 seconds.
Activate/deactivate the weather forecast for the standby display. Choose
your preferred temperature unit (℉ or ℃) and then proceed entering your
location. When activated, the weather forecast is shown in turns with the
clock display on the standby screen (each 10 secs).
There is a shortcut Local Radio under Internet Radio so that you can easil
go to the station list of your location. You may Manual Setup your location,
or let the system Auto Detect your current location. The system detects the
location according to the IP address of your connected network. Press
"Local Station" to enter this local radio list directly.
Select the playback mode of media center - Off (no repeat or shuffle),
Repeat all, Repeat one or Shuffle.
Default device name for DLNA is "AirMusic ". You may rename it for DLNA
setup on the PC or mobile. QR code for download and install "AirMusic"
control App on mobile.
The system is default to resume internet radio playback if you were listening
to internet radio or media center before switch off the unit. If turn this
setting off, the system will remain in the main menu when switching on the
unit.
system will notify you. Before starting a software upgrade, ensure that the
unit is plugged into a stable mains power connection. Disconnecting power
during a software update may permanently damage the unit.
Restore the default settings. After the unit is reset, the system will move to
language selection.
IR5500 / English Instruction Manual
6