LaserLiner EvolutionCross-Laser 8 Manual De Instrucciones página 18

Slope adjustment > 2,5°
8
Very rapid blinking.
Hand receiver mode
9
Optional: Working with the laser receiver RX
Use an RX laser receiver (optional) to carry out levelling at great distances
or when the laser lines are no longer visible.
To work with a laser receiver, switch the line laser into hand receiver mode
with the Hand receiver mode button (11). The laser lines will now pulsate
with high frequency, making the laser lines darker. The laser receiver RX
can detect these pulsating laser lines.
Hand receiver mode can be used for horizontal or vertical levelling as well
as for slope functions.
!
Follow the operating instructions of the corresponding laser receiver.
18
GB
3 sec