Publicidad
Technical Details:Water-Drops® (Transparent Item No. 60855 & Color Item No. 60856).
Melting 250 g of the granules will produce approximately 300 ml of liquid material.
The melting point for the Water-Drops is 170-180°C (338°F).
Preparations:
Properly using model water products for your scenery is a challenge for most model landscapers. NOCH presents the perfect
and easy to use solution for your model water needs.
The model water is one of many factors in creating a natural scene and we have the solutions. Our Modelling Compound (Item
No. 60920) is the ideal base material for riverbed or lakebed and this material is mandatory if you are working on a plastic layout
base. Make sure the Modelling Compound is thoroughly dry. This will prevent the forming of bubbles in your water. The NOCH
Riverbed Colour Set (Item No. 60875) is ideal product to paint and give depth to water body. We have plenty of pebbles, rocks,
flock and grass materials to decorate your water body and the banks.
Melting the Transparent Water Drops® (Item No. 60855 and 60856)
Select Air Circulation or Top and Bottom Heat and pre-heat oven to 170 180°C (338 356°F). Pour all the granules and Water
Drops® Softner (included in package) into a clean bake safe jar or pot. Put the jar into the pre-heated oven on top of a sheet of
aluminium foil or baking paper. Set the timer for 40 45 minutes and observe the melting process. The Water Drops will melt into
a clear liquid.
Info: The melting time may differ slightly between the various oven manufacturers.
Carefully remove the jar or pot from the oven.
WARNING: The water drops are extremely hot in fluid form. Do not touch or contact your skin. Wear heat resistant
protective gloves and clothing when using the water drops.
VERY IMPORTANT: Stir the water drops® with metal spoon or screwdriver. If the material is not
bubble-free or not transparent, return the jar or pot in the oven and heat it for a few more
minutes.
Tip: Wipe off your spoon or screwdriver with a fluff-free towel or rag. Be careful not to touch the spoon or screwdriver, it could
be hot.
You have 3 to 4 minutes working time before the water drops cool off and become a solid material. Pour the liquid into the
lakebed or riverbed. Allow the material to dry. You may use a hair dryer to heat the surface to remove any small bubbles or to
create waves. You may repeat the melting process and detail until you reach the desired scene.
Using the Colour Water-Drops® (Item No. 60856)
Follow the identical instructions and melting process that you used for the Transparent Water Drops®. Add the non-melted
colour granules into the melted (liquid form) transparent water drops and continue to do so until you acquire the desired colour.
The combination and amount of colours is entirely up to you.
Tip: To avoid a single colour, we recommend melting multiple jars or pots of the transparent water and then adding the colour
granules to each jar or pot.
Unused portions can be stored and re-melted at a later time.
Keep these instructions for reference purposes.
Français
Avant d'utiliser ce produit, veuillez lire et suivre attentivement les consignes de sécurité et le mode d'emploi.
Cet article est un produit de bricolage pour modélisme et n'est pas un jouet. Pour le montage, des outils tels une lame aiguisée,
des ciseaux aiguisés ainsi qu'une colle spéciale sont nécessaires. De ce fait, un risque de blessure est possible! Pour cette
raison, tenir ce produit hors de portée des enfants!
Tenir absolument ce produit et les accessoires (colle, peintures, lames etc.) hors de portée des enfants de moins de 14
ans! Ne pas laisser les enfants assembler ces kits sans surveillance d'un adulte compétent.
Pour l'utilisation des colles et des peintures, veuillez suivre les précautions suivantes: Ne pas manger, boire ou fumer
lors de la manipulation. Eviter tout contact avec les yeux, la peau et la bouche. Ne pas inhaler les vapeurs. Tenir à l'écart des
sources inflammables. Veuillez suivre attentivement le mode d'emploi et les indications du fabricant. Premiers secours en cas
de contact avec les yeux: Rincer immédiatement et abondamment à l'eau en les maintenant ouverts et consulter un
ophtalmologiste.
60855 Water-Drops transparent
60856 Water-Drops color
ATTENTION: Risque de brûlure!
Les Water-Drops® sont extrêmement chauds en employant. Ne pas renverser sur la peau !
En cas de contact avec la peau, refroidir immédiatement et consulter un médicin.
®
®
Publicidad
