Maintenance And Servicing - Denios FW-K Manual De Instrucciones

Moving
Lift the drum with the lifting device slightly and move it slowly.
Drums must only be moved in a vertical position.
Emptying
For emptying, the drum must be raised at least high enough so that it can be rotated freely.
Type FW-K:
By pulling on the chain (4) the drum can be slowly turned into a horizontal position and then emptied. The
chain can be locked in any drum position to secure the drum during transport or emptying.
When the emptying procedure is finished the drum must be rotated back into the vertical position again.
Type FW-N:
Release the fixing rods (5) that are to be found on the right and left of the pivot point by pulling them outwards
out of the anchoring. The drum can now be turned. If the drum is in the horizontal position it can be fixed on
another resting point and you can empty it.
When the emptying procedure is finished the drum must be rotated back into the vertical position again.
The drum can only be locked in the horizontal or upright position!
Watch out for uncontrolled turning and swinging movements of the drum
Unloading
For unloading the drum must be manually unlocked after lowering. For this the locking lever must be pulled and
moved clockwise. The tension in the locking chain relaxes. Then the locking device can be released and the chain
unhooked.

7. Maintenance and servicing

To guarantee safe working with the product the following checks are necessary:
Regularly check for ease of movement of the moving parts and if necessary lubrication with
-
commercially-available grease.
Regular sight and function checks at intervals of max. one year by a qualified person.
-
Fasswendezange 164395 / 164392 Seite 8 von 18 Seiten Ausgabe 05/2010