Elu PS274 Manual De Instrucciones página 28

E N G L I S H
Cutting non-ferrous metals
When cutting non-ferrous metals, the machine is only to be used to
perform vertical straight and mitre cross-cuts in the mitre saw mode.
We recommend that bevel and compound mitre cuts should not be
performed in non-ferrous metals. The machine is not to be used for cutting
ferrous metals.
• Always use a material clamp when cutting non-ferrous metals.
Make sure that the workpiece is clamped securely.
• Only apply saw blades that are qualified for cutting non-ferrous metals.
• When using lubricants, only apply wax or separation spray. Do not use
emulsions or similar fluids.
• Connect an FI or DI switch between machine and mains to avoid
residual risks caused by metal swarf.
The FI switch should comply with the following specifications:
rated voltage
rated current
reaction time
fusing current
The DI switch should comply with the following specifications:
DIN VDE 0661
rated voltage
rated current
fusing current
all-pole cutoff
PE monitoring
low-voltage release
Consult your dealer for further information on the appropriate accessories.
Transporting (fig. A1 & A2)
• To transport the saw, set the bevel and mitre positions to 0°.
• Press the combined lower guard and head lock up release lever (2) (fig. A1).
• Press the head down and press the lock down button (22) (fig. A2).
• Bring the saw blade to rest position and press the traverse lock (17).
• Always use the carrying handle (3) to transport the saw.
Maintenance
Your Elu Power Tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an Elu authorized repair agent where it will be disposed
of in an environmentally safe way.
en - 7
230 V
16 A
< 15 ms
30 mA
230 V
16 A
30 mA
L+N+PE
Elu After-Sales service
All Elu products are thoroughly tested before leaving the factory.
However, if the product needs repair, please contact your dealer or the
Elu Head Office for the address of the nearest Elu authorized repair agent
(please refer to the back of this manual).
• ONE YEAR FULL WARRANTY •
If your Elu product becomes defective due to faulty materials or
workmanship within 12 months from the date of purchase,
we guarantee to replace all defective parts free of charge or,
at our discretion, replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is provided.
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
GUARANTEE
22