Agilent 2100 Bioanalyzer Manual Del Usuario página 80

4
Installing the 2100 Bioanalyzer System
Setting up the 2100 Bioanalyzer Instrument
4 Connect one end of the serial cable to the RS-232 port located at the rear of
5 Connect the other end of the serial cable to the serial port (COM-port) of
6 If your PC is not equipped with a serial port, use the USB/serial adapter
7 Ensure that the power switch located at the rear of the instrument is in off
The power input socket accepts a line voltage of 100-240 VAC ±10% with a line frequency
N O T E
of 50-60 Hz. Maximum power consumption is 60 VA. There is no voltage selector at the
rear of the instrument because the power supply has a wide-ranging capability.
8 Plug the female end of the power cord into the power input socket of the
80
the instrument.
your PC.
cable that is provided with the instrument.
position.
Agilent 2100 Bioanalyzer instrument. Plug the male end of the power cord
into the electrical outlet.